Get a FREE Brake Check + 50% off Brake Pads with service!
Plus save up to $120 off Vredestein tires and MORE with rebates!
Book Online!

Skip to content

VIP's Advanced Multi-Point Inspection: What It Is and Why It Matters

Enjoy safe travels and peace of mind with VIP’s Advanced Multi-Point Inspection (MPI) service. Our in-depth, hands-on MPI determines exactly what’s going on with your vehicle and if any parts need service. It’s an inspection that will save you big in the long run, and with our $50 credit, you’ll receive an additional discount on any approved work we do for the same day.

Get $50 Toward Any Work We Find.
Schedule an Advanced MPI for your vehicle, and if we find something that needs attention, you receive a $50 credit toward any repair approved for that day. It's our way of making preventative care simple, so you can get back on the road quickly and safely.

What Is VIP's Advanced Multi-Point Inspection?

Complimentary multi-point inspections are important for keeping your vehicle is in the best possible condition. They check to see if your car is running optimally, which can save you money on gas, and enable you to find and fix minor issues before they become expensive repairs.

But complimentary MPIs are surface-level and can miss some underlying issues. To ensure your car is in the safest and best possible condition, VIP Tires & Service offers our Advanced Multi-Point Inspection service. Unlike regular multi-point vehicle inspection services, our Advanced MPI:

  • Removes the tires for precise measurements of wear
  • Performs a full brake inspection of rotor width, brake pads, and calipers
  • Provides precise measurements of your steering and suspension
  • Performs a scan of your vehicle’s computer to identify any current trouble codes
How Does VIP's Advanced MPI Compare?

VIP’s Advanced MPI is more hands-on than the complimentary multi-point inspection. A complimentary MPI might indicate that the tire tread is getting low or that the brakes are looking thin. The Advanced MPI provides specific measurements and actionable recommendations for any issues. In addition, the Advanced MPI includes a code pull, which is not part of the complimentary MPI.

What Is a Code Pull and Diagnostic?

A code pull is a check of your vehicle’s computer to see if there are any diagnostic trouble codes (DTCs) in the system. These codes indicate if there’s an issue with one of your car’s systems.

During a diagnostic, a technician will use that code to identify and inspect the systems affected. The technician will test the issue to figure out the root cause, and then once the root cause is identified, make recommendations on next steps.

Depending on the issue, some diagnoses are simple and quick to address, while others are more in-depth and take longer to fix. VIP technicians will always stop at the one-hour mark of a diagnosis and reach back out to the customer to provide updates and get approval to continue.

Service Comparison Chart

Service Complimentary MPI Advanced MPI Code Pull / Diagnosis
What's checked

A visual check of your vehicle’s essential systems, including:

  • Tires (tread) and tire pressure monitoring system (TPMS)
  • Brake inspection
  • Leaks or broken items on the undercarriage
  • Headlights, brake lights, and wipers
  • Horn
  • Dab tests on brake fluid, differential, transfer case, and transmission
  • Engine air and cabin air filters
  • Dashboard lights
  • Overview of the vehicle’s body and any damage

Tires stay on during a complimentary MPI.

A complete, in-depth check of your vehicle’s key systems, including:

  • Everything included in the complimentary MPI
  • Complete scan of TPMS and sensor battery life
  • Brake inspection with rotor, pad, and caliper measurements
  • Estimation of when brake service will be due next
  • Code pull for dash lights and any persistent codes in the system

Tires come off during AMPI for accurate measurements of brake components.

Code pull does not include diagnostic

A code pull of your vehicle’s computer.

If there are any issues, a separate diagnostic will be conducted.

A diagnostic consists of one hour of labor for a technician to track down any root causes.

Cost

Free

$50, which will be credited to any service approved and performed that day

Code Pull is free

Diagnosis is 1 hour of labor

How long it takes

15 minutes

30 minutes

10 minutes / 1 hour

When to get it

Free with every visit to VIP

Once a year

If you have purchased a used vehicle and want to ensure it is road safe

When you have a lit or flashing check engine light

When there’s something audibly or visually wrong with your vehicle

What you get

Printout with invoice
Live feed of the MPI

Full printout with invoice
Live feed of the AMPI

Work order and complete overview of the issue

“One way we try to save our customers time and money with an Advanced MPI is that, when we do a complete scan of the TPMS to check for codes, we also check the sensors. Because, more often than not, the customer will have to replace all of their sensors around the same time. It is more costly to do them individually, so we give them the details on the remaining battery life. That way it's top of mind if they’re replacing tires or doing a changeover, so they can do it all at once and save money." Justin Saba, Service Manager Stratham, NH

Why an Advanced MPI Matters

An Advanced Multi-Point Inspection is like an annual health check-up for your vehicle. Putting it off means that minor, underlying issues can compound over time, resulting in severe damage to other parts of your vehicle.

For example, catching a minor transmission leak early can be a much quicker and less expensive repair than replacing an entire transmission that overheats and fails.

In New England, Maine, Massachusetts, and Vermont require annual vehicle inspections, while Rhode Island and Connecticut require inspections every two years.

New Hampshire’s annual state inspections are currently no longer required, but your vehicles still need attention. If you relied on the New Hampshire state inspection as your sign for an annual checkup, be sure to schedule an Advanced MPI at your VIP location. It’s a guarantee that your vehicle is safe and your car’s wearable parts are looked at and identified as safe or unsafe.

We know no one likes a yearly physical, so when you schedule an Advanced MPI with us, if we find something, we’ll credit your $50 payment to any repairs approved and worked on that day. It helps make things a little easier on your wallet while providing peace of mind.

Key Benefits of VIP's Advanced MPI

VIP’s Advanced MPI is more than just a check on your car’s health; it’s proactive peace of mind that helps keep you and your family safe on the road while helping you save money in the long run.

Early Detection

Catch issues before they become expensive repairs

Better Safety

Helps ensure that your vehicle is road-ready

More Longevity

Extends the life of your vehicle through regular inspections

Long-term Value

Supports better performance and improved fuel economy through proper maintenance

Immediate Value

Applies your $50 credit immediately when work is approved the same day.

Peace of Mind

Gives you confidence that your vehicle is safe and performing as it should.

What Our Technicians Check

VIP’s Advanced Multi-Point Inspection is an in-depth examination of every part of your vehicle. Here’s an example of our multi-point inspection checklist​:

State Mandated Inspection

Tire Size

State Inspection Failed Items

Wheel Alignment

Dashboard Warning Lights

Brakes

Tire Pressure Monitoring System

Brake Calipers

Horn Operation

Brake Lines & Hoses

Windshield Condition

Parking Brake

Wiper Blades

Tie Rods

Window Operation

Wheel Bearings

Front Lights

Ball Joints

Headlight Lens Condition

Control Arms-Front

Back Lights

Control Arms-Rear

Brake Fluid

Sway Bar Links & Bushings

Antifreeze/Coolant

Shocks/Struts

Power Steering Fluid

Coil/Leaf Springs

Transmission Fluid

Idler/Pitman Arm

Engine Oil Level/Condition

Torsion Bar

Oil System Cleaning Service

Leaks

Fuel System Cleaning Service

Axle Seals

Heating & Air Conditioning System

CV Axle

Air Filter

Engine/Transmission Mounts

Cabin Air Filter

Steering Rack/Box

Charging & Starting Systems

Power Steering Lines/Hoses

Battery & Terminal Condition

Transmission Lines/Hoses

Battery Hold Down

Front Differential Fluid

Serpentine Belt & Components

Transfer Case Fluid

Power Steering Pump

Rear Differential Fluid

Water Pump

Driveshaft

Radiator & Coolant Hoses

Fuel System Components

Spark Plugs

Exhaust System Components

Tires

Frame Condition

When Should You Get an Advanced MPI?

We recommend that you get an Advanced MPI for your vehicle once a year as part of your routine maintenance. However, there are a few other specific circumstances when you might want to schedule an appointment:

  • Before a big seasonal change, such as just before winter or a summer road trip
  • After buying a used vehicle to ensure that all parts are working properly and it is road-safe
  • When one of your dashboard lights is on but nothing obvious is wrong
  • If you’re a New Hampshire resident and haven’t had a vehicle inspection since the New Hampshire inspection law changed

If you’re not sure if it’s time for your vehicle to get an Advanced MPI, contact your local VIP store and talk about setting up an appointment.

Don’t let today’s minor issue become tomorrow’s massive headache.

Plus, at VIP Tires & Service, if we find any work that needs to be done, we’ll credit the $50 cost of the Advanced MPI for the work that you approve for that day. Schedule today, and we’ll ensure that we get you safely back on the road.

Yellow circle with a chat bubble containing a lightbulb icon.

FAQs

  • What is an Advanced Multi-Point Inspection?

    An Advanced Multi-Point Inspection (MPI) is an upgraded version of a standard multi-point inspection offered by VIP Tire & Auto. Where a standard MPI is a visual check of your vehicle’s system, the Advanced MPI is more in-depth and will provide precise measurements and assessments of your vehicle’s systems.

  • How is the Advanced MPI different from the complimentary MPI?

    The complimentary MPI is a visual check that looks for obvious signs of wear or damage. An advanced MPI involves taking off the wheels, getting precise measurements on rotor width, brakes, calipers, tire wear, and also includes a code pull to identify any codes present in the system.

  • Do I still need an inspection now that NH doesn’t require state inspections?

    While you don’t need an inspection to drive legally in New Hampshire, it is highly recommended that you get an Advanced MPI annually as part of preventive maintenance. Not taking care of preventable safety issues can cause major problems down the road, including possible injury and costly repairs. For example, ignoring a loose ball joint for too long could mean your tire completely disconnects while on the road.

  • How long does an Advanced MPI take?

    An Advanced MPI takes a total of 30 minutes to complete. After the inspection, if there is any work that needs to be done, the VIP technician will provide you with an estimate for how long the repairs will take.

  • What does the $50 credit cover?

    The $50 credit covers the full cost of the Advanced MPI. If it is decided that the vehicle needs service, and if service is approved and performed on that same day, the $50 will be credited toward the cost of the service.

  • What’s the difference between a code pull and a diagnostic?

    A code pull reads a car’s computer system to determine if there are any diagnostic trouble codes. It flags that something is wrong, but not necessarily what is wrong or what the cause is. A diagnostic is when a technician goes into the system to figure out the root cause of the issue and make recommendations on how to fix it.

  • How often should I get an Advanced MPI?

    It’s recommended that you get an Advanced MPI for your vehicle once a year. It is the most thorough way to determine if any of your parts need to be replaced or if there is a developing issue with any of your car’s systems.

  • Is the Advanced MPI available at all VIP locations?

    Yes, all of VIP’s locations can perform an Advanced Multi-Point Inspection. While it’s possible to request an Advanced MPI during a walk-in service, it’s much more convenient to schedule an appointment ahead of time.

Search By Vehicle
Search By Size
Select a vehicle from My Garage
Recent Searches
Saved Vehicles
OR
Search for a new vehicle
Tire Size
Where do I find my tire size?
Tire Sidewall
Inside Door Jamb
Tire Sidewall that shows width, aspect ratio, and rim diameter
tire and loading information found on the inside of a door jam
Add a different rear tire size
Please select a different rear size from the front
All-Season
All-Weather
All-Terrain
Winter

All-Season

All-Season tires are versatile and suitable for warm and cool climates, but not recommended for extreme hot or cold weather conditions because of specific rubber components.

All-Weather

Like their name suggests, all-weather tires are versatile and can perform well in a variety of weather conditions and can be severe snow-rated.

All-Terrain

With bigger treads than traditional all-season tires, all-terrain tires allow for both on and off-roading capabilities.

Winter

Winter tires are manufactured to perform well in snow, ice, sleet and other cold weather conditions. Winter tires are typically soft, with an intricate grooved tread pattern — made for holding compacted snow and creating traction — and are severe snow-rated.